We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Store Boa Snowboard Boots: A Step-by-Step Guide for Beginners

Learn how to store boa snowboard boots correctly, from drying and loosening the dial to protecting the lacing cables, so your boots last every season.

Updated November 2026

Learning how to store boa snowboard boots properly keeps the liner dry, protects the lacing cables and keeps the fit consistent for next season. The process takes about 15 minutes after your last run: dry the boots fully, release the tension, clean off grit and store them in a cool, ventilated spot. Skipping these steps is the most common reason boa systems start to stick or the liners begin to smell.

Dry the Boots Completely Before Storing

Moisture is the biggest threat to snowboard boots in storage. Remove the liners and insoles, pull the tongue forward and let each component air dry at room temperature for at least 12 to 24 hours. Avoid direct heat from radiators, space heaters or car dashboards, since high heat can warp the shell and crack the foam in the liner. Stuffing the boots with newspaper helps draw out moisture, but swap the paper once it feels damp.

Shopping for one? See our guide: 6 Best Snowboard Boots with BOA for Every Rider (2026).

Release the Boa Tension and Protect the Cables

Storing boots with the dial cranked tight keeps stress on the lacing cables and the internal spool. Turn the dial counterclockwise until the cables feel loose, then open the lacing cage fully. Leaving the cables relaxed also helps prevent kinks that can cause the dial to catch later.

  1. Turn the boa dial counterclockwise until the cables are slack.
  2. Unhook or unlatch any top straps or power straps.
  3. Check that each cable runs cleanly through its guides, with no twists or flattened sections.
  4. Wipe the cables with a dry cloth if they feel gritty.

Clean the Boots and Choose the Right Storage Spot

Salt, snow and sand left on the shell or cables can work into the boa mechanism over the summer. Brush off debris with a soft brush and wipe the outsole with a damp cloth, then let it dry. Store the boots in a cool, dry closet or garage that stays above freezing and below roughly 80°F, and keep them off concrete floors where condensation can form. A breathable bag or box works better than sealed plastic, which traps moisture.

Storage Checklist

  • Liners and insoles removed and fully dry
  • Boa dial loosened and cables relaxed
  • Outsoles cleaned of grit, salt and debris
  • Boots stored upright or on a shelf, not compressed
  • Location is cool, dry and free of direct sunlight

Check the Boots Before the Next Season

Before your first ride, reinstall the liners, tighten the boa dial and inspect the cables for fraying or flat spots. Test the dial several times to make sure it turns smoothly and releases fully. If the cables look worn or the dial feels rough, a footwear repair specialist or the manufacturer’s service channel can often address it. Ride-ready boots that were stored correctly usually need only a quick adjustment to fit as before. Consult a professional if you see cracked shells, broken cables or a dial that won’t release.

Common Mistakes

  • Storing boots while still damp, which leads to odor and mildew.
  • Leaving the boa dial fully tightened for months, which stresses the cables.
  • Placing boots near heaters or in a hot car trunk.
  • Sealing boots in airtight plastic bags.
  • Stacking heavy items on top of the boots, which can crush the liner.

A simple boot dryer or a set of moisture-absorbing boot inserts can speed up drying between days on the mountain and before storage. Look for a boot dryer that uses gentle airflow rather than high heat, since heat can damage liners. View on Amazon

A soft brush for cleaning boa cables and outsoles helps keep grit out of the mechanism. View on Amazon

A breathable boot storage bag keeps dust off the shells without trapping moisture. View on Amazon

FAQ

Should I keep my boa snowboard boots loosened all summer?

Yes. Loosening the dial fully relieves tension on the cables and internal spool, which helps them last longer. Tighten the dial again only when you reinstall the boots for riding.

Can I store boa boots in the garage?

A garage can work if it stays above freezing, does not get very hot and has low humidity. Avoid areas prone to condensation, and keep the boots off the floor.

How do I get rid of an odor after storing my boots?

Remove the liners, let everything air dry fully, and use an odor-absorbing insert or a pair of dry newspaper inside the shell. Repeat drying if the smell persists, and consult a boot specialist if mold is visible.

Conclusion

To store boa snowboard boots well, dry everything completely, loosen the dial and clean off grit before putting them away. Keep them in a cool, dry, ventilated spot and avoid heat and airtight bags. Checking the cables and dial before your first ride next season will help the boots fit and perform as they did before.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our snowboarding guides, checking product details against manufacturer specifications and owner feedback.

About the author

Emily Parker
Emily Parker

Emily Parker writes reviews and buying guides for Snowboard Everest.